+86-575-83360780

NEWS CENTER

News Center

  • What are the characteristics of rapier loom accessories?
    Under the premise of replacing manual weaving and shuttle looms, rapier loom accessories mainly meet the market needs of weft insertion rate, making i...
    View More
  • Analysis of the reasons for the formation of the path of the water jet loom
    Defects will inevitably occur in the weaving of the grey silk on the water jet loom, which will affect the quality of the grey silk and reduce the qua...
    View More
  • Briefly describe the precautions for long-term shutdown of water jet looms
    Briefly describe the precautions for long-term shutdown of water jet looms Due to various reasons: such as shortage of funds, poor turnover; no weft r...
    View More
  • Display of loom stop reason and running status
    When a failure occurs, the loom will stop, and the red light of the tower pole indicator will light up or flash. In addition, the reason for the stop ...
    View More
  • Repair of warp and weft on looms (5)
    4. When the platform stops due to weft (in the case of SDP) Weft insertion mechanism of water jet loom ·When the weft insertion error occurs, i...
    View More
  • Repair of warp and weft on looms (4)
    3. When the platform stops due to weft (for RDP specification) Water jet loom weft insertion · When the weft insertion error occurs, it will be...
    View More
  • Repair of warp and weft on looms (3)
    2. When the platform stops due to weft (for FDP specification) · When the weft insertion error occurs, it will be detected by the weft detector...
    View More
  • Repair of warp and weft on looms (2)
    2) When the selvage yarn (planetary gear selvage device) breaks (1) Thread the broken selvedge yarn into the specified reed teeth. (2) Securely tie to...
    View More
  • Repair of warp and weft yarns on looms (1)
    1. When the water jet loom stops due to warp • When a weft insertion error occurs due to warp slack, hairiness, or poor shedding, the weft sensor...
    View More
  • Methods of replenishing and replacing yarns on water jet looms
    1. Supplement of selvedge yarn on water jet loom How to replace the bobbin and how to thread the selvedge yarn 1) Press the stop button. 2) Move the ...
    View More
  • Operation of water jet loom doffing system (picture explanation)
    When the fabric is woven to a pre-set length, the fabric is cut and unloaded from the water jet loom. When the green light of the tower pole indicato...
    View More
  • Safety operation matters in the operation of loom equipment(2)
    (4) Leveling operation of water jet loom dobby For a dobby loom, when leveling and adjusting the heald frame, the relevant operations should be perfor...
    View More