1. When the water jet loom stops due to warp • When a weft insertion error occurs due to warp slack, hairiness, or poor shedding, the weft sensor can detect and stop the loom. •When the selvedge yarn and yarn end process...
1. Supplement of selvedge yarn on water jet loom How to replace the bobbin and how to thread the selvedge yarn 1) Press the stop button. 2) Move the mandrel spring 1 horizontally and remove it from the bobbin shaft 2. 3)...
When the fabric is woven to a pre-set length, the fabric is cut and unloaded from the water jet loom. When the green light of the tower pole indicator lights up, the operation should start. Notice It is necessary to wait...
(4) Leveling operation of water jet loom dobby For a dobby loom, when leveling and adjusting the heald frame, the relevant operations should be performed by pressing the forward and reverse buttons. When the loom is rota...
(1) When the water jet loom is operating Before operating the push button switch, confirm that the surroundings of the loom are safe. Do not operate the push button switch by more than two persons. Do not run the mach...
Projectile loom refers to a loom that uses a sheet-like weft clamp (also called a "projectile") to introduce the weft into the shed. High weft insertion speed, strong adaptability to fabric varieties, can weave wide fabr...
Zhejiang Sanhe Intelligent Tech Co.,Ltd ( Predecessor is Zhejiang Sanhe Textile Machinery Co., Ltd, founded in 1996), authorized National high-tech enterprises, Provincial S&T enterprises and Maker of weft feeder industrial standard .
Please leave your Email or phone nomber, so we can contact you as soon as possible.